The following issues should be noted when using the wood pellet machine:

1. During the initial operation stage of the wood pellet machine, do not add too much raw material. During the running in period, the output of the new wood pellet machine is generally lower than the rated output. However, after the running in period, the output will reach the rated output of the machine itself.

2. Special attention should be paid to the analysis of aspects when grinding wood pellet machines. After the wood pellet machine is purchased, it needs to be run in before operation. Before formal use, reasonable grinding has a very important impact on the later use of the wood pellet machine. This is because the ring molding roller of the wood pellet machine is a heat-treated part. During the heat treatment process, there are some burrs in the inner hole of the ring mold, which will hinder the flow and forming of materials during the operation of the wood pellet machine. It is strictly prohibited to add hard debris into the feeding device to avoid damaging the mold, affecting the production efficiency and lifespan of the wood pellet machine.

3. In terms of the smoothness and cooling process of the sawdust pellet machine, the pressure roller of the sawdust pellet machine needs to squeeze the sawdust and other materials into the inner hole of the mold, and push the reverse material into the front material. The pressure roller of the sawdust pellet machine directly affects the formation of the particles When the wood pellet machine is operating normally, the working temperature of the pressure rod is extremely high. At this time, what we need to do is to supply oil in a timely and reasonable manner to ensure the lubrication between the components of the wood pellet machine and avoid long-term friction causing damage to the wood pellet machine. To ensure production safety, fatigue operation of machines is strictly prohibited.